part 4 build a new car...

12/12/2014

So after a big crash what i had,we pushed the car in the workshop,and i removed the engine+gearbox,and the bits from inside....and started strip the body panels and all the damaged body and chassis parts as well.
some picture about it....i haven't got more of this stage....

I've done a sandblasting on it to clean all the rust and paint off
The front end wasn't so bad (and it was rebuilt in 2008),just needed to put it back straight.
The rear end was worst,i had to cut it off fully,and replace it with new body parts.
The roof ....badly damaged....i had to cut it off and replace it with a good one from another car.
Sorry but i haven't got any pictures about these moments.....
When i've done it all,we took the rebuilt body to the specialist,who welded a proper roll cage in it.

This is how it was when we brought it back to our workshop:

0 Comments

What Our Clients Are Saying

"Laszlo has performed the most amazing bare metal nuts and bolts restoration on my Jaguar XJS Lister. His talented ability to refabricate from scratch, metal panels that are no longer available has kept the project moving and at a very reasonable cost. It is rare to find a restorer who can weld, fabricate and also strip refurbish the engine and all of the mechanicals on the car."

"Top of the range work, can turn his hand to anything and everything is 110% perfect. - Mark Freudeneau, Cheshire UK'

"Laszlo did a great job on my Morris 1000, gave a reasonable quote, then booked in for some excellent fabrication work on basically a whole front end and door posts of my Morris and numerous other welding repairs at workshop - the car now rescued, looks original again. Looking at his other excellent work and projects, like the Jag and Issetta, my Morris was a walk in the park! If you need a restoration job doing then look no further than The Classic Mechanic - D. Haycock UK"