Some more trimming work... We have to fit another ski slope,cause the manual conversion. Got one from a manual car, but black,so needed a new "coat". And the gear gaiter was also black and scruffy. Steering wheel...its a sporty one (Italvolanti) fitted by Lister, also a bit worn,so decided to have a frest "coat". The face panel of the instrument cluster had a leather cover,we decided to replace that one too,and a bit customized it with a few stitches... Here comes the pictures: Will be back soon..... :)
0 Comments
The original door cards off the car were in bad condition,so we agreed with the owner we will make new ones with new leather on the handles and pockets too,and because the car was modified by Lister in 1986,we decided to reproduce the door cards with a LISTER sign on them. Throughout the process all the metal parts were blasted and re painted,bits and bobs were zinc coated,rivets were replaced with new ones....All the works completed in our workshop. Welcome! This topic is about a Classic Mini body shell restoration. 1998 MPI model. "Only" 20 years old,but worst then some 50-60 years old vehicle. The shell came to us in a bad state,someone started the work on it,the front end has been removed,they blasted it here and there,but not primed it..... Here comes the pictures: Plastic wheel arch fitted,and checking other bits too.... Inside the front wings:
-All joints sealed -For plastic wheel arches,we use stainless riv-nuts instead of the self tapping screws + stainless bolts AND the fitted riv-nuts having a rubber cap sealed around inside the arches to keep the moisture out …... The work continues...…, here is the story by pictures...:) Now let see what the left side hiding... Welcome! This topic is about body shell restoration to a Mercedes SL190 from 1958. Being 60 years old is not too bad ,but a lot of hours will go into it.... Hello everyone! This topic is about body restoration to a Jaguar E Type series1 3.8 from 1962. Early car (but not flat floor),roadster,LHD…. My customer stripped the car ,and removed the paint back to bare metal,which revealed the truth,and we had to realise there is a lot more need doing ,then it was planned..... Wanted to keep as much from the original shell as we can, not replacing everything with new panels...... there it was so much repair--Not High Standard!!- done to it previously …..you will see it,the pictures speak for themsheves… Here they are: |
The Classic Mechanic
I am Laszlo Izso and I am The Classic Mechanic. We undertake part and full restoration and repairs of modern classics, classic and vintage cars. It is more than a business, it is a vocation as restoring these cars is my passion. Categories
All
Archives
December 2022
|
Location |
|